Easy Cheap and Cheerful Needle Felting ––– A Free How To Series

Part 1 - P1 -

Start at the first link and work your way through,
or skip around to find what interests you most!

Needle Felting on a Budget! Part 1 – The Base

Needle Felting on a Budget! Part 2 – The Color

Needle Felting on a Budget! Part 3 – The Tools

Needle Felting on a Budget! Part 4 – The Face

Needle Felting on a Budget! Part 5 – Final Details

Part 3 - P1

 

Needle Felting on a Budget! Part 2 – The Color

When I started needle felting I tried all kinds of fiber! I bought craft wool from Michael’s, I bought dyed wool roving from Etsy, I tried ordering it cheaper through Amazon, I even attempted to use real Alpaca. It was all difficult to work with, and ridiculously expensive. I was never going to be able to make this a permanent hobby with these prices!

I spent a couple hours Part 2 - P1researching different types of fiber people use for felting, yet it always came back to wool. Luckily right near the moment I was going to give up, I ran across a video of girl using a cat scratcher to shred regular yarn for use in needle felting. It was a eureka moment! I have boxes of yarn! I tried the method, and… it worked!! You really need to really put force into it, but I only use yarn now, because it has worked better than wool for every project I wanted to make. You can watch the video here: https://www.youtube.com/watch?v=-ILcYAXf_bg

 

 

On a side note: When my girls were young they misheard me when I was using pillow stuffing, so from then until now they call it “fluffing” and I can’t bring myself to correct them. In fact, the yarn shredded into acrylic fiber is so soft and fluffy, I’ve ended up calling it fluffing as well!

One of the dragons I’ve made, for more photos click here: Teagan

Part 2 - P2 - feature

Needle Felting on a Budget! Part 1 – The Base

I read a lot of blogs and books about felting, and the base seems to be a much debated topic. Some say the base needs to be wool, other say you can use doll stuffing. Some say they use wire armature, other’s say wire is not required at all. Here is what I do, penny pinching the whole way…

Step 1.
Start with chenille stems, also known as pipe cleaners. I buy mine from any craft store that I can use a coupon to get them 40% off. It’s easier to cover them if the end color is similar. So for black or dark green creatures I use black stems, or for example if my finishing color is yellow I’ll use white stems. Really any color will do, because we plan to cover it up! Bend the fuzzy wire into the basic bones of any 3D sculpture you wish to create (it’s okay if it’s super flimsy), then move on to step two.

Step 2.
You can use coarse pillow stuffing, it’ll do, however I prefer the very slightly more expensive doll stuffing. A word of caution, if you get pillow stuffing that is too luxury it will NOT function at all as a base. Wrap some of the stuffing around your wire base, and start felting it into itself. This will work with any needle, but a single course needle, sized 36 or below, will perform best.

Step 3.
Use a sharpie to mark out patterns before you start, then adding colored fiber is as simple as shading in a coloring page!

Part 1 - P1 -

OPTIONAL:
Magnets & Glue
I primarily make shoulder dragons, so I use Goop to glue two super strong Earth Magnets to the bottom of the dragon. I’ve tried several glue options, and Goop is the only one to hold up to actual use. For the wearable invisible shoulder base I sew a metal washer (from Home Depot), into a muslin cotton cover. To wear the dragon simply take the small cloth base and slip it just barely out of sight along the top of your shoulder under your clothing. Tighter clothing will hold the base in place better. Place the dragon on top of the base, the magnets will attach to the base. Play around with the placement of the base in a mirror until the dragon sits upright. When removing it’s best to slide it off, rather than pull.

One of the dragon styles I’ve made is below, for more photos click here: Toren

Part 1 - P2 - feature

Felting: The Butterfly Dragon

Of all my felted shoulder creatures, this butterfly is easily one of my very favorites!! The idea for it came through my very bright brother in law Ryan. He picked the colors orange & red for the wings, and I added the colors to the tail. What a wonderful collaboration project!!

You can buy one like it at my Etsy Shop here: Dragons From The Woodland Realm